MICROLEAK-SEAL IMPREGNANT,INC. -- MICROSEAL  -- 8030-00N008412
<pre>=====================  Product Identification  =====================

Product ID:MICROSEAL
MSDS Date:01/01/1987
FSC:8030
NIIN:00N008412
=== Responsible Party ===
Company Name:MICROLEAK-SEAL IMPREGNANT,INC.
Emergency Phone Num:315-337-2720
CAGE:OO206
=== Contractor Identification ===
Company Name:MICROLEAK-SEAL IMPREGNANT,INC.
Phone:315-337-2720
CAGE:OO206

=============  Composition/Information on Ingredients  =============

Ingred Name:BAKELITE RESINS
Fraction by Wt: 10%

Ingred Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK)  (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 90%
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:PENETRATING AGENT
Fraction by Wt: 0.1%

=====================  Hazards Identification  =====================

Effects of Overexposure:NOSE,THROAT & EYE IRRITATION.
    HEADACHE,NAUSA,VOMITING.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH W/PLENTY OF H*20 FOR @ LEAST 15 MIN. SKIN:FLUSH
    W/H*20. INHAL:REMOVE TO FRESH AIR & CALL PHYSICIAN. INGEST:INDUCE
    VOMITING & CALL PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point:40F (4.4C), OC
Lower Limits:1.6
Upper Limits:9.0
Extinguishing Media:SMALL FIRE-CO*2/DRY CHEMICAL;LARGE
    FIRE-ALCOHOL-TYPE FOAM.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:HYDROGEN CHLORIDE & CARBON MONOXIDE MAY
    BE FORMED UNDER FIRE CONDITIONS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. FLUSH WITH
    LARGE VOLUMES OF H*20.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP AWAY FROM HEAT,SPARKS & FIRE.DO
    NOT LEAVE CONTAINER OPEN.USE W/ADEQUATE VENTILATION.AVOID
    PROLONGED/REPEATED BREATHING OF VAPOR.
Other Precautions:AVOID PROLONGED/REPEATED SKIN CONTACT.AVOID CONTACT
    WITH EYES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED CANISTER MASK,CHEMICAL
    CARTRIDGE RESP PROTECTION
Ventilation:LOCAL EXHAUST PREFERRED & MECHANICAL VENT ACCEPTABLE.
Protective Gloves:RUBBER
Eye Protection:FACE SHIELD
Other Protective Equipment:NONE.
Supplemental Safety and Health
MFR ADDRESS: 707 WEST BLOOMFIELD STREET,ROME,NEW YORK,13440. DATE OF
    PREP:NOV,1980.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:200F (93C)
Vapor Pres:50
Vapor Density:3.0
Spec Gravity:0.80
Evaporation Rate &amp; Reference:4.5 (BUTYL AC)
Solubility in Water:25%
Appearance and Odor:COLORLESS LIQUID,NON-RESIDUAL ODOR.
Percent Volatiles by Volume:90

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:HCL & CO MAY BE FORMED UNDER FIRE
    CONDITIONS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IAW FEDERAL,STATE & LOCAL REGULATIONS.
    ATOMIZE INTO AN INCINERATOR.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.