GIBSON PAINT CO -- MARINE ENAMEL  -- 8010-00N050251
<pre>=====================  Product Identification  =====================

Product ID:MARINE ENAMEL
MSDS Date:09/23/1987
FSC:8010
NIIN:00N050251
=== Responsible Party ===
Company Name:GIBSON PAINT CO
Address:1199 B 12TH ST
City:OAKLAND
State:CA
ZIP:94606
Country:US
Info Phone Num:415-834-9818
Emergency Phone Num:415-834-9818
CAGE:GXBSN
=== Contractor Identification ===
Company Name:GIBSON PAINT CO
Address:1199 B 12TH ST
Box:City:OAKLAND
State:CA
ZIP:94606
Country:US
Phone:415-834-9818
CAGE:GXBSN

=============  Composition/Information on Ingredients  =============

Ingred Name:KEROSENE (PETROLEUM), HYDROTREATED; (140 SOLVENT
    HYDROCARBON MIXTURE)
CAS:64742-47-8
RTECS #:OA5504000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SOLVENT NAPHTHA (PETROLEUM), LIGHT AROMATIC; (SOLVENT
    NAPHTHA LIGHT AROMATIC)
CAS:64742-95-6
RTECS #:WF3400000
OSHA PEL:50 PPM
ACGIH TLV:125 PPM

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE & CHRONIC:OVER INHALATION CAN
    AFFECT CENTRAL NERVOUS SYSTEM. SKIN:DEFATTING. SIGNS & SYMPS OF
    EXPOSURE:OVER INHALATION MAY RESULT IN ONE OR MORE OF THE
    FOLLOWING:HEADACHE, DIZZINESS, LOSS OF APP ETITE, WEAKNESS OR LOSS
    OF COORDINATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:COMPLETE RECOVERY WHEN REMOVED FROM
    THE EXPOSURE AREA.

=======================  First Aid Measures  =======================

First Aid:INGEST:DO NOT INDUCE VOMITING. ASPIRATION OF LIGHT
    HYDROCARBON LIQUID CAN CAUSE PNEUMONITIS. INHAL:REMOVE TO FRESH
    AIR. SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:IMMEDIATELY
    FLUSH W/POTABLE  WATER FOR MINIMUM OF 15 MINUTES, SEEK ASSISTANCE
    FROM MD . SKIN:FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD .

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:106F,41C
Lower Limits:1.0%
Upper Limits:6.1%
Extinguishing Media:DRY CHEMICAL, CO*2, OR FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . AVOID SPREADING BURNING LIQUID WITH WATER. SPRAY FOR
    COOLING PURPOSE. DO NOT WELD, HEAT(SUPDAT)
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL OPEN FLAME IN VICINITY OF SPILL.
    STOP THE LEAK. USE SORBENT MATERIALS FOR SMALL SPILL. PREVENT
    CONTMINATION OF SOIL, GROUND WATER. FOLLOW PRESCRIBED PROCEDURE TO
    LARGER RELEASES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE NEAR FLAME, SPARKS, HOT
    SURFACES. DO NOT WELD, DRILL CNTNRS. USE IN WELL VENTILATED AREA.
    DO NOT USE PRESS TO EMPTY DRUM, EXPLO MAY RSLT.
Other Precautions:READ CAUTION LABEL ON CONTAINER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR CARTRIDGE
    RESPIRATOR - UNLESS VENT IS ADEQUATE.
Ventilation:LOCAL EXHAUST AND MECHANICAL (GENERAL).
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL SAFETY GOGGLES.
Other Protective Equipment:A SOURCE OF CLEAN WATER BE AVAILABLE FOR
    FLUSHING EYES AND SKIN.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC:OR DRILL CONTAINERS.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>310F,>154C
Vapor Pres:5 @77F
Vapor Density:HVR/AIR
Spec Gravity:1.2 (H*20=1)
Evaporation Rate &amp; Reference:>1 (BUTYL ACETATE =1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SOLVENT ODOR & COLOR OR WHITE LIQUID.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
WATER, STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:SMOKE, VAPORS & TOXIC FUMES (THERMAL
    DECOMPOSITION).

====================  Disposal Considerations  ====================

Waste Disposal Methods:PLACE CONTAMINATED MATERIAL IN DISPOSAL
    CONTAINERS. DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, & FEDERAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.